Q1 – What’s the first thing I should do to setup my UPstage?

Answer – Plug the power supply into your Upstage360, and let it charge until the light on the power button stops blinking.

    Q2 – What can I connect to my UPstage? How do I switch between them?

Answer – There are 3 playback modes, from the dock for an Echo Dot (Gen 1 or 2), Bluetooth, or Auxiliary in. When the Upstage is powered on, press the power button for about 1 second to change the source, with the power button light turning red when the Upstage360 is in the dock mode, Blue when it is in Bluetooth mode and White when it is in the Auxiliary input mode.

     Q3 – How do I use Bluetooth?

Answer – The button for Bluetooth pairing your Upstage360 to other devices is the small button on top of the volume control. So first, if the light on the power button is not Blue, press the power button  for about a second at a time until the power button is lit Blue. Then press the Bluetooth button for a few seconds and release it. When you hear the ascending tones the Upstage is Bluetooth discoverable and you should begin the search with your device (i.e. phone/tablet/PC).

     Q4 – Any tips/limitations on using two UPstages for separate Left and Right Stereo channels?

Answer – 1. You can connect two Upstages via either an audio cable, or Bluetooth…not both.

Once connected, you can use either Bluetooth or Aux-in as a source, the Echo Dot is not able to breakout the signal to transmit